The UK's biggest automatic scooter forum.
Separate names with a comma.
Cheers mate, Thats cool all input greatly recieved! As the carb was not a great outlay thought would be a shame not too. Though have read that...
Its a stock dna 180cc 4t, was thinking that have 34mm carb coming (got for good price) then thinking power cam, pipe and finish with head but as I...
As per title, will be starting to gather some parts to upgarde the dna 180, have malossi 34mm carb, will be getting the malossi powercam, but...
What's that? a rouge drain of the electrics! I will change the bulbs and buy some contact cleaner to make sure its all extra clean at every...
well I checked the connectors today, cleaned and still nothing! I wanted to double check the connections and to scientifically rule them out! To...
Not sure about the cdi? I thought it would involve the relay, the switches or where ever else the circuit runs. Just can figure out why there is...
Hi everyone, I have been going over a typhoon 125 that I got off somebody with the thought of smarting it up and selling it on. It's had a few...
I use the greens in mine. I find the others are too stiff and feels like they cause clutch slippage with higher speeds. I have one clutch with...
Or as you where describing maybe the rad is slightly blocked?
Could the scoot be running too lean? Just a thought but maybe a possibility?......
What about vxr 200 old faithful! Good all rounder if bought from the right person! "Some" of the fun of the fxr but without the maintainence...
Hi mate I had a runner with a similar issue. It would start idle and sometimes just about be able to scoop the revs up.... It turned out to be the...
Ive had loads of probs with mine recently. Only thing I can suggest is to check the earths, next to regulator, on the frame above the flywheel and...
I remember when i worked in a garage fixing cars and sometimes the brake pipe flexi's used to die, (break down inside the rubber) and the brakes...
I think the master cylinders are diff, as just tries the lever on a scrap yard grimica master cylinder on it fits lovely, shame there not for a...
I've just bought some brake levers and fitted them to my gilera runner. I am not sure what master cylinders I have or if they are all the same on...
Its a runner 125 2t it had an old mashed up sp 125 loon but replaced with fx loom There are four connectors next to where the relay goes. I have...
That's cool but why are there four wires? There is a green/black one blue/black two red wires into one connector and one yellow? Also thanks for...
I had a similar prob with the pick up/ acceleration on a runner after fitting a performance belt as it was slightly wider than standard and when I...
I started with an newer mashed up loom and replaced with an older loom I have noticed a few small differences but didn't think the relays would be...