The UK's biggest automatic scooter forum.
Separate names with a comma.
I sprayed around the inlet with brake cleaner and there was no change in running to suggest a leak Reeds look ok with no bends or damage in...
hi all So my bike has been running spot on until the beginning of the week and now it won't run atal My set up is 70cc pro sport kit Standard...
Bit of an update Tried normal fuel and it's been fine no back fire or bogging But is abit spluttery but can't work out if that means rich or lean
Only bogs then back fires at top end when warm I found a broken main earth which I have fixed and I still have the issue Once it bogs and...
Will try 99 today see what it's like just seems quite high Could wrong squish cause the same problem?
But if an update Found my vacuum fuel tape to be constantly open which I have since replaced and found my air/fuel screw only 1/2 turn out which...
evening all So my zenith is up and running and on the road but there is clearly jetting issues. The standard carb was 12mm with 74 main jet I...
evening all I have a quick one I have just purchased a CDI for my Peugeot moped but have just looked and seen it's a 5 pin but my loom is for a...
Ah ok cool, never had a bike with one on lol
so just got my next shitter project for £60 haha It's a 1998 Peugeot zenith, engine tuning has been sorted however I have noticed that the front...
Yo Just wondering has anybody tuned a peougeot zenith/buxy or same engine? If so what have been your setups i.e. Cylinder, exhaust, carb, main...
Anybody got wiring diagram for vivacity non immobilised engines? Just took old loom out (ACI100) as some dickheads tried to nick the ped but cut...
Hi all just a quick one On the GF's brothers moped twist the throttle back and it takes awhile before it gets going, is this down to rollers or...
Hi all So moped failed MOT on headlight not being bright enough even though nothing has changed It's on a peugeot vivacity, anyway of making it...
Carb is standard and has no mixture screw, peugeot gurtner carb It's all standard bar a yasuni pipe
Hi all not been on in a while Hoping somebody can help me with a little issue I have a moped running manual choke, when the choke is up it is...
Yea I know haha but now have running issue at full throttle but need to test ride it to find out loo
It was ACI100 but a bypass unit so I'm happy as got the whole donor bike for £30 lol
I wired up the old CDI from the pictures and I found that the coil was dodgy so fit old one and work :) But now have a cutting out issue on full...
They really are blury lol Can't work out what wire goes where lol