The UK's biggest automatic scooter forum.
Separate names with a comma.
hello guys i just want to ask about this cylinder kit i have never seen anyone using it. Is it good does anyone now anything
no he is doing it for he's own fun because he's 2 stroke lover and only for me and his bikes because here in greece the 2stroke tuners will take a...
The specs are: 52 jasil crank pm59 rd350 vforce4 reeds 36mm pwk carb with 170 main jet and 45 pilot jet the variator is all stock 125 with just...
cylinder
Thanks for the replie and one more question I have typhoon 125 variator and belt would a runner 180 variator and belt help
Hello guys I have that Malossi 172 which is bored to 67.50 mm for my TPH and i want to know about this type of Exhaust port Shape is it good? and...
Yes it has an adjustable float and I checked the float pin its alright
Hello again what is the best setup for the MHR Replica Cylinder kit and with a bit of porting while the MHR team 2006 exhaust work
Hello my PHBG 19 when at full throttle it will start overflow from the overflow tubes for a bit how can i fix it Main Jet 95 Idle Jet 50
Thx for the reply I'm pretty sure that mhr 6t with race exhaust 28 carb with the right jets mhr overrange and race cdi I can achieve 16 hp as...
What I need to make more power (Hp)
Hello guys, how much power will a Zip make with the following parts Malossi MHR 6T Cylinder Kit with match port the crankcase Malossi Team 2006...
thanks for the replies and what pilot jet with tecnigas next r exhaust?
Best Recommended air filter for PHBG 19 with 95 main jet
Thanks for the reply in not planning to buy an aftermarket rotor because is a little bit expensive for my budget. I believe that a malossi cdi...
Thank you very much
If I put a lighter flywheel will it help the response of the rev
Ok so the stock ignition with the right timing is enough good to make power at top end Btw thanks for the reply
Hello im new to this group I Have a Honda DIO zx (horizontal) and i wanted to ask if i need a race ignition to make good power right now im...