The UK's biggest automatic scooter forum.
Separate names with a comma.
If you dont have a pointy dispenser, cut a small hole in a bag, push it over the hose and tape it tight, fill the bag with fluid, lift high, loose...
Yes try to get fluid into the hose while it is detached from the caliper, and pull the hose off the forks and get it above the brake resavour,...
Bleeding brakes can be a right sod, at all times make sure that the resavour is topped up, disconect the hose from the brake caliper, unbolt the...
My beverly 125. Has about 12 bhp and does an honest 50mph,big scoots are heavy and not very aroedynamic so i dont think 15 will get you to 75 mph,...
Dont know much about your model of scooter, i have a piagio bev 125,if the fuel pump is a vacume one dont keep pressing the button, my manual says...
Yes your probably right, unfortunatly i am totally deaf
The carbs empty because its not getting enough fuel, thats why ive put a large fuel filter above the carb, if theres no fuel in the filter theres...
You could get a few loafs in this
Went for a run from hull to whitby last month, on my 2002 beverly 125, the carb ran dry of fuel a couple of times, (ive put a large fuel filter...
Beverly rebuild nearly there, i think the fuel pump is dead, used a fairy liquid bottle as a petrol tank and it ran checked all the pipes and one...
Its a black air intake thingymabob
Lay it down gently to avoid it gettin blown over
The spindle turns to drive the wheel, unlike chain driven bikes where the spindie is fixed
Started today on sorting out my beverly 125,the scarabeo is leakin oil out the crankshaft oilseal and ive never taken a variator of and i belive...
I reckon that it is, hard is also brittle, thats why the camshaft broke, i should think that the shearing propertys of an m5 bolt are pretty high,...
There arent any marks, ive had to make my own, luckly i had two scoots the same
After getting the valve timing wrong on my scarabeo 125 2002, the valves touched the piston damaging the camshaft keyway, i was going to get a new...
Just a quick update on the valve timing, the reason ive been having problems with the valves touching the pistons is that the piston is not at tdc...
No but i always like to buy fixer uppers,some times i get luckey sometimes not
The rebuild of my red scarabeo is on hold for a bit, i tried to find top dead centre to put the camchain back on but i didnt run right, so i tried...