The UK's biggest automatic scooter forum.
Separate names with a comma.
Hi all I was out riding my sym joyride 125cc the other morning when I tried to start it a few hours later it wouldn't long story short the pilot...
If the there's holes in the diaphragm can I replace this or is it a whole new carb and I was going to check the valve clearance just need a deeper...
So my bike refuses to start good spark good fuel and good air when I do finally get it to start it's very slow reacting to low rpm as soon as I...
I have just nipped out to check the oil it's sitting above the higher limit on the dip stick
Yes that is correct it was only at the mechanic a few weeks ago my clutch had stuck he cleaned everything and put a new spark plug in although...
So my bike ran out off fuel wouldn't start cleaned the vaccum fuel pump carbaretor was cleaned a week before it started running was out on it for...
Hello guys I rode my 125cc sym joyride evo to the train station when I get back it wouldn't start as it had no fuel I filled the tank up and tried...
Yean they only seem to have parts up to the 2008 model mines a 2015
Does anyone know were I can order genuine parts for a sym purejoy125cc evo iv looked online to no joy
Sure here's I believe is the sensor but it has am old fashioned female male fitting but then turns into this type off fitting Into the back off...
Not to sound stupid but that's the actual but on the front wheel lol
Also when I start the bike the Speedo goes all the way to the top and returns
It still has a spinning sensor on the wheel then about half way up the wire turns electrical am I best taking it to a garage or is it an easy fix
I have removed at the top end and it seems to be electrical not mechanical
I have removed the cable at the sensor end it's a male female connection the Speedo is needle the odometer is analogue
There's a cable running down from the back off the Speedo to the sensor on the wheel all looks ok
Hello guys recently purchased a 2015 sym purejoy 125cc evo and the Speedo and odometer has stopped working any ideas what it could be and how to...