The UK's biggest automatic scooter forum.
Separate names with a comma.
Yep I see that. And the other 2 O Rings.... sit within the gasket also but slightly proud?
I was referencing the following YouTube clip at 1:10:39 [MEDIA]
Ive decided to replace base gasket and head gasket today. Im slightly confused to where the 4 small 0-rings fit. I was aware you slide them down...
Thanks for the replies, I will try tomorrow and see...
What hose do I send the water through to reverse flush?
So today I inspected the water pump which seemed to be fine. No evidence of leaking or broken pieces. However I took the coolant hose off which...
UPDATE - STILL OVERHEATING - VERY FRUSTRATING Water isn't being jetted back into the expansion tank. Only If I squeeze the 2 hoses that are...
Temp gauge goes to red within 5 mins of idle from cold. I changed thermostat and still the needle goes to the red. Cylinder head doesn’t feel...
Anyone?
I must agree with you there, I think it is from a 125 as that’s exactly what jet is inside. Anyway she fired up today after some adjustment to...
Thanks, will check all tomorrow. Also are the leader 200 engines on the VXR and ST runners exactly the same? I ask as I'm referring to the old...
I am...
No i haven’t as the engine has only done 4000 miles so didn’t think to. Does anyone know where I can order some main jets for this Walbro carb?...
Ive just installed a Gilera Runner ST 200 engine into my VX 125 frame. I had trouble starting the bike but I managed to fire it up by bleeding the...
As title says
I know the VXR 180 and 200 will but will any of the GT engines fit straight in/ plug and play? Or the ST engines from the newer runners
I have a VXR 200 engine. My rear wheel hub from my other VX125 engine will not fit onto the rear wheel axle on the 200, the axle is larger in...
Visually looking at it, the cylinder barrel is the same across all leader engines. It’s just a different bore and head?
Number stamped on cylinder head is 995035, which when entered in google brings up 250 300 cylinder head. However I'm trying to confirm if my...
Or if not will the stanchions be the same as the VX ones?