The UK's biggest automatic scooter forum.
Separate names with a comma.
anyone got any ideas on wat i can try now as have now changed the coil and stator?please any advice maybe helpful
hi still having problem? have had top end totally off and now changed the stator? any ideas
not changed anything in ages,plug was damp with fuel and using an iridium but have tried new br9es. gonna put a std 180 kit on in next few days as...
hi going home the other day my runner started backfiring and i pulled in and it stalled,but started straight up again? 100 yards down the road it...
all fixed. changed head o ring,dint work/fix problem, fitted new base gasket and another new o ring, still not fixed. had water pump off to check...
its the one the shaft goes thru but if u got money replace as many as u can afford starting with the shafts 2 (one the shaft goes thru and the...
did u check all the bearings in the gear box mate. and mainly the one in the gearbox cover that the rear shaft came out of. usually they dont...
better putting a 180 or performance variator in with belt to match and as per norm jet to suit.can use 125 gearbox etc and you dint mentin head...
yes mate. switch direct to battery. had pump on a yr nearly and all was good. had head off yes'day and o ring had gone so replaced(no water in...
if skint try the new cheap copy for 130 quid. see pm have even done a test on it.or i got an old malossi kit for 75 quid plus 5 'er for post
hi ya Mr MARSH. BEEN ON ONE OF HER MAJESTYS HOLIDAYS IM AFRAID.PUMP BEEN ON AGES AND WAS A1 BUT JUST HAD HEAD OFF AND O RING GONE SO REPLACED BUT...
hi. i have water pressure build up and then water coming out of expansion bottle lid even tho its done up tight. i have electric water pump...
the red an white runner vx that someone built up an had a project page on is written off. someone on the isle of wight bought it last year but...
just take your gearbox out first as there are 2 sorts or gears. there are splined and push on/press on gears.
crank should be ok but top racing cranks are quite good and i would go for around a 104 main jet. pm tuning rollers i find last the best(even tho...
try 3*3.8 rollers and 3*4.5 rollers with a 88 jet(might even be smaller . you seem to be going up with rollers and jets at the same time. now you...
WONT BE BLOCKED MATEBUT MAYBE BROKEN REEDS.POOR STARTING,BACK FIRING MAYBE WHILE TRYING TO START,NOT TICKING OVER PROPERLY. not sure wat bike u...
STOP. YES THE OIL PUMP BELT DOES RUN THE WATER PUMP. ONLY HOPE YOU GET THIS MESSAGE BEFORE YOU DISCONNECT IT OTHERWISE BANG. WHY THE F**K DO...
this for a 70 i am guessin as not heard of this for the 125+ ? as i got malossi 2000 variator an have both leky an kick start. if it is for a 125+...
when you were hitting the highest speed was it running ok as in was it spluttery,did it get there ok,no bogging,was it quick acceleration. as it...