The UK's biggest automatic scooter forum.
Separate names with a comma.
Little update thank you for all your help. Managed to pick up a immaculate vw polo 2000 plate but uplifted version ( better bodywork/interior) For...
Looking for a very cheap Runabout car obviously. Looking to spend max 500 and looking ideally for a diesel for cheaper tax and logetlgevity....
Going to take varistor cover off tonight pull clutch, and see if it turns freely and no noise without clutch. Inspect clutch , I also have a spare...
Don't you worry cowboy I'm sure I'll be tagging you straight away. Thanks mate you've been great. Yes triple checked oil 80w90 150ml, Did this...
You make it sound so easy hahaha :) Right let me start pricing this one up
FML...Surely it would affect the ride though. Is it a hard job
[MEDIA] Presume this doesn't sound normal for a scooter. It's been doing this for a while, scooter runs very well at the minute , know issues...
Was given a knackered x8 which I've finally sorted thanks to you guys on here with your words of wisdom. Bike runs well upto 59mph not thrashed it...
Figured it out idle was on too tight as I've put my finger back over I've adjusted down , sorted it now whoop
@Stevep Steve if there is anything blocking the choke port it's just insanely revs to the point of the scooter is pulling off on the center...
[MEDIA] Video to show problem Problem after problem Idles down afterwards
Strange one bikes home , rode beautifully home. No air leak ,it was something to do with the electric choke. Made sure all rubber hoses to carb...
Got to thank you guys for your patience with me. Inlet rubber is a bugger to get in. [MEDIA]
Right installed carb today boom beautiful start and idle, try rev and revs perfectly but then won't settle down, just keeps revving , even though...
Right I think i may have found the problem big school boy error, I reasembled the carb wrong, I didn't assembly the slide correctly , so the slide...
Just spent another two hours trying to work it out bike is running rich , plug is black and wet , brought carb home tonight to make sure it's all good
Set stock settings today still cuts out , running rich spark plug is black and wet
Checked all of them pulling my hair out. So when the bike starts it idles okay , adjust idle screw either way cuts bike out turning half a turn...
Right had engine started now, now bike rough idles and cuts out with any you touch of throttle..... Was working fine before pulley worn, I did...
Ok cheers marsh ,
