The UK's biggest automatic scooter forum.
Separate names with a comma.
I have a Piaggio Zip Sp 2004 and its fully standard. I won't to 70 it up and was wondering what a good set up would be for the standard crank. My...
Hi, i'd put a 65 jet in and work down untill your spark plug looks milk chocolate brown and doesn't bog down, if you do not upjet soon it will be...
either rollers or jets mate ?
It was on the middle needle mate and the spark plug was white so do i need to go higher for some reason?
Thanks mate I'll keep it at 75 An drop the needle An see if it goes like fuck
Basically I've been told 75 is too high because my bike doesn't go past 45 it has Tt exhaust Malossi multi var variator 3G clutch 5.5 rollers...
Only doing about 45-50 used to do about 55. tnt cylinder kit malassi multivar variator 5.5g rollers polini 3g clutch green springs
Had a Malassi multivar variator and a polini 3g clutch put in my bike and 5.5g rollers an a new belt but my top end is only 47mph with a pm tuning...
And if i buy some jets should i go up or down mate i have 72 now i think
i had a technigas next r mate.
Yes if you get a gear up kit it will also be faster on your top end :)
Hi, basically my top end blown up a while ago and i got a new one and run it in properly with the correct ratio 50:1 and never went past 30mph for...
Cheers mate , i think i'll get a new crank before a 70 but how much would somewhere charge to do it normally?
cheers mate, would you say run it richer than 100ml or 100ml exactly? i think the crank has been in since the bike first got on road would you...
I have a yasuni z exhaust for my bike and other than the jet and rollers its standard. My oil pump failed on me and i have a new cylinder kit on...
Thanks minor, if it is not balanced out of the box for any reason will i cause any damage to the bike and how many miles will it needed running in...
So it should be ready to fit out of the box with the new seals and bearing obviously? And would you say it is pretty straight forward to fitting...
What would you say the charge would be to check/get it balanced and have it fitted properly?
Cheers mate, will get a motorbike tuners shop to do it then :D
My thoughts extacly, my bike is a 51 plate so I really need one for a 70 :D