The UK's biggest automatic scooter forum.
Separate names with a comma.
cant find one mate, im trying to a sort a meet round our way mate
sorry for the late reply. didnt get a stator with the other engine, possibly is a connector, everything works but the switch. i have another...
try whacking it lol. not tried kicking it? try the fuel in the barrel like i said, it should fire up and might get the fuel sucking through...
Found this, had a quick look, explains pretty much everything! Tuning and different engine types http://www.pro-bike.ro/forums/index.php ......
Sorted, rollers were too big, 4.5g in now, runs sweeeeeet
argos have one in for £20
just top it up shake the bike about a bit, keep an eye on keep topping it up after a couple of rides, always worked for me
this is the 2nd one :( and even at 20 when the clutch shouldnt slipping it dies :(
hmm, put the tougher ones in, still wont pull away, doesnt even go properly when it's cold. (am i right in thinking with mallosi springs, green...
cheers mate, i'll take a look, i did think earths but wanted to get an idea first, think theres something near the key too. im in blaydon
seems since putting my new engine in the scoot will start with no key, any ideas where to look for first cheers!
will have a look, cheers
it was the piston, runs fine now
i'd say, try 4.5 G rollers first. be careful with the clutch its a bitch! research into it first before trying to take it apart, if it hits...
Bloody piston was on the wrong way, couldnt see the arrow. so anyone putting a piston on, point the bloody arrow downwards lol!
Righteo, clutch springs were too light for my exhaust, put the mid strength ones in, it pulls off ok, revs seem fine, slightly low maybe.....
as soon as the clutch goes to bit it splutters and keeps spluttering. it will redline with the wheel off the ground but splutters a bit getting...
any other ideas? splutters soon as the clutch bites, i can rev it to limit with back wheel off the ground but splutters a git getting there...
she runs! not properly though, must be burning the WD40 and 2 stroke oil, put some on and around the crank as it was a bit damp, must be burning...
wasnt the rollers. Engines in, all hooked up turning over ok, lubed the engine up with 2 stroke before i put the head on so i need to get all...
