The UK's biggest automatic scooter forum.
Separate names with a comma.
The very definition of a scooter is a Vespa, ask any kid, old person in the world and they will say vespa!! I love vespa's :D. You ride what you...
http://www.ebay.co.uk/itm/171381122515?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 This wheel will fit straight into a classic typhoon...
Partially blocked rad?
If your talking about splines along the length of the crank tail, then they are machined down to reduce friction etc. If it's a groove round the...
Head gasket leaking or thermostat sticking shut?
Get a picture up!
Sound's a bit light to me 7.3g, my 125 std typhoon uses 12.5g rollers!
I think 10g would be to low, 12.5g is around 125cc weight. Try 12.5g +/- or carb jet size may be at fault?
nobody will want to pay what it cost to build!
The std main would be a 53 or 56 dependent on year, derestricted it need's to be a 58 or 60.
Keep the speed down and don't thrash it to with in an inch of it's life every day and it will be fine!.
Give it a good clean/service checking everything work's as it should = brakes cleaned n lubed, plenty of 2t oil, tyres in good order, remove and...
Use the std airfilter and one size up on the main jet.
Same here work's very well.
Not easy, you'll need to remove all the screws on the R/H rear panel, try to pull it out a little then stick your hand up, the catch is just...
Best leave well alone, I've had shitters before were you think I wish I'de never set eyes on it, nevermind work on it!
It need's low gearing to wheelie or an excess of power, a 70cc won't be torquey but will won't to rev. If he want's it to wheelie of the throttle...
Yes both cc's use the 20.5 mm carb but have different jet/needle set up's.
Compression is very low for a 180, it want's to be up around 160+ at least. it sound's like the wrong carb, it should use a 90 main jet, 50 pilot,...
A little update for those that are interested in my slow moving project![ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH]I might actually get...
