The UK's biggest automatic scooter forum.
Separate names with a comma.
Right so before we had: 7.2gr rollers 70 kit revs of 9k the clutch etc all the same and then you had issues with power loss so you did a new top...
hey bud, a pop is certainly a good sighn, shows you have combustion. You could leave the plug out overnight to let fuel evaporate. And yes you...
i have to agree, the aerox rear end once tidied up looks cracking, i have a similar style tail light with the indicators built in. However i still...
its just a way of covering a large percentage of the foam to protect it from spray. Obv the more holes you drill in the bottle the more air and...
i have heard of people using cut open coke bottles with holes drilled in other the foam in rain to stop them soaking up the spray. This will...
i havent read the old post, but i assume the bike revved past 7k before. possibly best to keep all your posts in one post as i have no idea what...
i belive we have the same engine, i have a yamaha aerox 100cc air cooled bike. Theirs not alot of info on these motors but from what i can tell,...
Another update, I received my 6 gram rollers, fitted them and gave it a thrash, they allow the bike to rev out alot more as you will see, however...
just to say, the needle need to be removed and the cylinder needs to be filled so it is solid, otherwise fuel will be allowed to pass and it will...
Auto chokes as far as im aware are always on, so the bike will be flooding, i found this when i broke my auto choke on my sym jet 50cc, with a...
take th head and barrel off and have a look, could be a blown gasket, or just worn rings, if the barrel looks clean you will likely get away with...
was it set up correctly and jetted right? spark plug colour checked etc?
your rev counter shouldnt sit on zero unless its off? as a bike idles around 1-1.5k unless you mean it dosent go to 0 when its not running?
you will need to re jet your stock carb, which could be hard as the stock sym carbs are a pain to get pars for i found
The second video shows how the bike changes into second at around 40 mph, this drops the revs to around 3k where their is no power and the bike is...
man you guys with the knowledge dont like coming forward do you? just to say i tried 3 of the original 8 gram rollers in the bike and it now...
most screws on a bike are made from cheese, i tend to buy a bulk load of bolts etc in a decent quality grade materiel and swap them over as i work...
hmm, well that might suggest an airleak maybe? if its not able to pull fuel through all the way. Can you blow fuel through the system?
evening fella, where abouts in surrey are you from? sounds like an epic scooter run haha
on the rs the engines did change at some point from a rotax 133 to a 123, however theirs no diffrence in power. The carbs changed from 34mm to...
