The UK's biggest automatic scooter forum.
Separate names with a comma.
Fuken good point no matter what you're tweaking! Put the 100 towards the result you would really like.
2.5mm lower back wall port (boost) on such a small stroked engine seems excessive. Thats a shitload of m/s on a relatively revvy engine? What...
I'm not familiar with HPI's scooter ign.'s but are with their jetski ones. If they have the same ability to write your own advance curves and...
NEVER EVER run a "P" projected plug unless you have to. Their purpose is to burn off deposits in engines that would otherwise foul plugs.
B is 14mm thread, P is projected electrode. R is internal 5K resistance, 8 is heatrange, E is 3/4" thread depth, S is a normal non race internals....
4 is a fuken hot plug, Don't run one. Even a 7 is a bit on the edge for a hard ridden scoot. An 8 will run most.
Has anyone tried a downdraft diaphragm type carb on a scoot? It would flow into the reeds much better and you could pull a shitload of length...
I did once with a clapped out Z50 honda. Dead stock except for drilled main jet and a new rear tire. Ended up tuning with nitro content as had no...
Thanks again, and the name "nitro gurl" besides being pretty fuken cool reminded me of a question, yet another. Anyone turned the timing and...
Send me some pics. pwcdenny@bigpond.net.au I would love to see some of the different cylinders, before and after. Im still getting my head...
I have all the "black magic" gear to grind a cylinder. (except a small enough angle head handpiece to do transfers on these tiny cylinders, but...
thanks mate, I'm on the northern side of the Gold coast. About a mile from movie world, if you know it.
I don't do the whacky weed myself, it makes me sleepy and even dumber than normal. It's amazing what one can find in sheds though.
Minor confusion, thanks alot! for the encouragement. I read the variator article on this site and it put my mind to ease. I been reading a load...
Fuken yanks! Paul Hogan did a tourism campaign in the early 80's aimed at the American market, they call prawns shrimp. Aussies call small...
Hey wobbly, do you have a rd 250 or 350? I rode a 250 when I was about 17, they were a peaky fuker! I liked the RZ better. The vforce...
Thanks for the reply, wobbly 51. I found out moto tassanari do make reeds for minarelli's. Vforce 3's. Dunno about scooters but they work...
This is my first post after introducing myself. I have built many performance pwc (jetski) engines before but Im very new to scooters. Like...
Hi, nice forum. At least it isn't in German or Dutch or whatever! There is bugger all scooter tsch. info in Aus so I'll ge bombarding you...
