The UK's biggest automatic scooter forum.
Separate names with a comma.
What year is the bike?
There are two needle bearings in the clutch pulley halves, front and rear. I have known the front one to fail before
Indicators are not powered from the ignition control unit.
If it isn't fitted with an indicator relay then they run through the rectifier.
Check for wear in the two bendix seating holes (cvt cover and engine block)
Could also be the kickstart half moon engaged slightly
Pictures please of the progress:cool:
It's the carb jetting. You have an aftermarket pipe with the standard size main jet in there.
What you are feeling when it first starts is the...
You've got to rejet the carb to suit the pipe.
I have an idea, it's thin, practically transparent, but an inkling........
Can you post a picture of the whole scooter please?
Both sides would be a great help
Best to start a new thread with m
Best to start a new thread with more detail please
You can still get aftermarket parts for the general stuff like cylinders, gaskets, shocks, variators etc.........but body panels will be a...
It's been out of production for years now.
It's always a first point of call for me on any bike. You do it just to rule it out of the equation.
Spray some brake cleaner around the intake manifold area with it idling. If it either picks up or dies, there it is.....
Also, did you...
I did this with my speedfight 100 to bypass the immobiliser
Replace the turn signals on the front, it'll be easier in the long run
Go with whatever fits your budget
Crank shaft splines are knackered