The UK's biggest automatic scooter forum.
Separate names with a comma.
Gonna do a mock up today as have both frame
Just need to get a petrol tank
Got me a knackered typhoon frame
(Yep you was right)
Was never gonna work on the nrg frame
So gonna use the rear end off the typhoon frame
As the more I look at the angles of panels for the typhoon and nrg and seat height for both
With typhoon seat and bucket looking like it seats hi...
All the information I have is from here
Definitely seat and bucket need changing
So many mixed comments that I've found regarding this
Right ive got a picture nrg mc3
I would like to know if piaggio typhoon panels will fit the rear I know I'll have to change seat and bucket I've...
Right so I've got a nrg mc3
I like to know if the typhoon panels would fit on the rear I know I'd have to change seat and bucket
Seen a few posts...
Alright all will piaggio nrg power forks fit a mc3 ?
I've a found a set of ebr forks online for the power and they look exactly the same as a mc3...
Someone must have some information regarding the nrg extreme being based on the mc2/3 or a cross between the both in relation to engine / fork...
No pictures at the moment I'm afraid
I bought as part of a joblot so it a project
And it's got piaggio typhoon wheels on
The reason trying to...
Alright all just trying to get some information about a piaggio nrg extreme year 2000 on a w reg.
Right so what I'm trying to find out is it a mc2...
Thanks for the quick reply
Thanks for reply
These are the race fairings
I would like to put on as mine are crap
And there a lot cheaper than original
Hi all does anyone know if the aprilia rs125 race fairings 2006/2010
Ie nose cone and side panels fit the rs 50 2006/2010
I believe the original...
Aprilia rs50 2010
Put nose cone on today headlight has two plugs coming of but I can only find one plug on bike ?
First picture is of plugs...
Sorry for late reply working late had no time for bike till today
Yep bent needle all sorted
Thanks for replys
Got another issue now started new...
Thanks for reply
Took cable of the slide and idle screw back out gave the slide barrel a slight rub with wet/dry
Check splitter where cables...
Tried that makes no difference at all
Only way I can make it idle is by putting my finger slightly over the hole marked with yellow line in first...
Thanks for reply checked already had throttle off about ten times
Had slide out of carb ten times to make sure it was in properly