The UK's biggest automatic scooter forum.
Separate names with a comma.
Sounds good and do you know if I will have to remove the engine or can I take the panels and seat box out to get to the head?
Cheers mate, do you know the torque settings for the head?
Ok thanks, to be honest I think it's my head gasket :( an mot from a year ago says 20000 miles and doubt it's ever been changed and looking at the...
How do I remove the warm up valve?
You have so much knowledge! Thanks for all that, I Always use red sealant. I'll try those tests and thanks again mate
Yeah I've got just water in it as well I'll put the proper stuff in when I have time
On my way back from work I got 101.5 :/
Ok you will need 5mm dellorto jets, see what jet you got in there
Don't worry about the needle atm let us know how the jetting goes and what jet you have
I already did ring
He got the money to buy a brand new cannondale but not £15 to get his bike working perfect? What a twat
Anyone know if pedparts is open today seeing as it's a bank holiday?
Do you know if pedparts is open today seeing as it's a bank holiday
I'm going to put some sealant around the intake manifold and see if that works, if not, time for a 70 kit :)
Here are some pics and you can do this while it's still on the bike
Take the bowl off the bottom of the carb by undoing the two screws
Do it your self, just take the 2 screws off the bottom of your carb but when the bike is cold cause a little bit of fuel will come out, you will...
Ok, double check what's in it first, takes about a minute to do
Yeah change the clutch springs so it revs higher when it pulls away
It pulls away at 1500rpm?
I would say it's got to be maybe 120 but defo over 100, if it's pulling away slow in general then it maybe the clutch engaging to quickly, what...