The UK's biggest automatic scooter forum.
Separate names with a comma.
I don't think anyone on the forum cares about such matters, if the scooter works that's all they want !
In the scooter world a year 2000 is ancient, parts are difficult to get but the Yam is a nice scooter !
Use jump leads on a second good battery, see if that works as it could be battery.
The std CDI will and has alway's worked fine on a 50/70cc 's, the cdi has a rev limiter to stop over revving the engine, having used a "unlimited"...
That's it !
Open the throttle a little when cranking over.
Water pump seal worn, need's replacing, thermostat pipe re-sealing, oil in the airbox is quite normal for a 4t engine, is it high mileage ?check...
If it is the latest efi model then your not going to do hardly anything to it, a barrel /ecu kit maybe but no pipe clutch or variator will help to...
Yes what Damjam said, it's the torque pulley not twisting as it should but just fit a new clutch unit complete !
Check the rear clutch, if it's worn it will take out drive belt, cheap enough to replace the whole transmission.
My first go on this "rant topic" page. here goes..... You see a scooter or bike advertised with 12 months m.o.t ! this does not guarantee 12...
It will be like many Chinese scooters, same bike with a different badge. Don't spend lots of money on it as it's not worth a great deal at all !
I've been into model making since I was a kid, I mainly make 1 1/2 th scale bikes, I need a Bentley for the louvered bonnet for my next bike build !
Hi all, anybody one the site into making plastic model kits? I'm after an old Airfix 1 1/2 scale 1930 Bentley in any condition. I know it's not...
You'll need to go on engine type poss 152 qmi, sounds like a bt49-qt9/ scout etc so a std exhaust, a "performance pipe" won't make a lot of...
I think I may have to use your "Chinesium" word to describe things that are crap !:D
I used two 10mm ish size nuts, it's not the diameter it's sideways spacing that's needed.
What size headlight bulb is it using? 35 or 65w ? Using the lower wattage will help with the charging system. Check voltage when you get it running.
Any luck on a wheel ? I can get one here on the facebook page.
Wiring loom , engine mounting is all different, just easy to repair or get a second hand 50 engine.