The UK's biggest automatic scooter forum.
Separate names with a comma.
Correct
Yes, normally the regulator would output 12v ac current to that wire, but when you cut it and connect to white/red&blue you are providing it dc...
Yellow from engine to yellow on loom Other yellow from engine to blue on loom Green from engine to green on loom On regulator, you need to find...
A year and a half later I finnally got around to test this in practice. Just as I suspected, it is possible to fully reuse the 50 2 stroke loom...
I got an idea for the project 2 years ago but I first wanted to try myself at build a fuel injected 150 Zip and a liquid cooled 180 4t Zip...
According to the manual there is like 1V difference
Why not use the original regulator for 2 stroke zip and connect lights to dc. Less work and should work fine
The >2018 piaggio scooters all run on dc. It's a very simple modification to convert the older ones. The pros are that the light doesn't flicker...
I know this is old but the 50 4t regulator can handle everything perfectly.
Very likely. I'd suggest borrowing a regulator from someone to test it out.
I never used the 125 regulator. Only electronics from 125 beside the ones in the engine itself I used was the 2 part cdi New link for the manual:...
Yes, I kept the regulator. Check the specs in the provided file. 2t 50 output at idle is 25-30V 2t 125 output at idle is 27-31V 4t 50 output at...
I use it for different stunts and short rides (<2h) and it doesn't seem to bother me. I only ever notice significant vibrations at specific low...
Different account ♂️: I used the provided diagram for 50 4t to figure what goes where. There are 3 groups of wires comming from the engine. I...
