The UK's biggest automatic scooter forum.
Separate names with a comma.
I've tried 13,5 rollers but not really any chance. I'm going to try the stock pipe and find out if there's any difference...
Thx for the answer, I've gone way up to 125 (main jet) where the engine started to gallop when you released WOT but no power gain. I've of course...
There was a 50cc Runner water pump axle installed which is some 5mm shorter than 180 axle so the cog was loose and contacted the engine housing...
Hi all! A mystery for me, what has happend and why, and how to fix engine block detrition? Water pump and oil pump both turn freely and the belt...
Hi! I've got a mystery, changin idle jet and needle position has effect but changing main jet has practically no effect in jet range 90-120. Bike...
This seems to be more complicated than just "stiffer springs"-adjustement. Belts available to fxr 180 vary slightly both in width and length. It...
What about sliders vs rollers in this case? Planning to replace 13,5g rollers with 12g slider if its worth the extra money...
Hi thanks for reply, I guess that will cause engine rew much higher in take off? Is there any way to tune the variator more like this video....
There are many topics about slow acceleration off the line. Answers vary from jetting to belt but I think it is most probably a variator question?...
Hi all! I've tryed to search the web but no results... What is the compatibility between Runner firts modell (1998-2003?) parts? Are the body...