The UK's biggest automatic scooter forum.
Separate names with a comma.
Cool, glad it's running, it obviously had a big bore kit on it or an open filter in the past to need a 90 main jet.
Never ever use instant gasket on the reed block, I made this mistake......Take the reed block back off and remove the instant gasket......get some...
Mine does 54mph (speedo indicated)......With the 80 jet in, needs dropping down a few jet sizes though, it's bogging a bit at low revs now that...
It sounds like you have an air leak, try spraying some carb cleaner around the reed block assembly, are you absolutely sure that the crank seals...
Thanks for popping round today Steve, I took the scooter out to refuel after you had gone and it was running great for about 20 mins.......then...
I'd. Just like to say that euro Scooter parts in brierley hill are fantastic, I ordered some parts on Thursday night that I desperately needed and...
Do you have a contact number Steve? ....... I can't find a messaging system on this forum so could you forward your number to...
Hi guys, Does anyone have any carb jets for a piaggio nrg near to Birmingham that i can buy, I need a 75, 80 and 85. Cheers.
Thanks Steve, that's fantastic, thank you :-)
The gaskets on mine are rubber and they look like they are part of the manifold and reed block so it looks like I'm gonna have to replace them.
Also.just did a compression test (108psi)
Right guys, I think I've found the issue, it starts great and will idle but won't rev much, I sprayed some carb cleaner around the reed block area...
OK Steve, thanks, I shall get a jet pack and go from there, I did raise the needle a couple of notches and it made it worse.