Recent Content by Mark White

  1. Mark White
    Post

    Ludix one. Gurtner PY-12 carb

    Thanks guys. I'm working away for the weekend so will check that out as soon as I can. Watch this space
    Post by: Mark White, Sep 5, 2014 in forum: The Workshop
  2. Mark White
    Post

    Ludix one. Gurtner PY-12 carb

    The slow idle screw is approx 1.5 turns out
    Post by: Mark White, Sep 4, 2014 in forum: The Workshop
  3. Mark White
    Post

    Ludix one. Gurtner PY-12 carb

    There is only one screw with a mormal screw head, and one that you adjust with a pen or special tool
    Post by: Mark White, Sep 4, 2014 in forum: The Workshop
  4. Mark White
    Post

    Ludix one. Gurtner PY-12 carb

    It's probably about 1.5 turns out from being fully in. I have screwed it in further with no changes, I then put it back To where it was, then...
    Post by: Mark White, Sep 3, 2014 in forum: The Workshop
  5. Mark White
    Post

    Ludix one. Gurtner PY-12 carb

    Yeah, it was ticking over before and ran perfectly. It runs and revs now, but won't idle on its own. It will with a slight twist on the throttle....
    Post by: Mark White, Sep 3, 2014 in forum: The Workshop
  6. Mark White
    Post

    Ludix one. Gurtner PY-12 carb

    Thanks hairyjim. That sorted the leak, but now it won't tick over without cutting out. The idle screw seems to make no change either.
    Post by: Mark White, Sep 3, 2014 in forum: The Workshop
  7. Mark White
    Thread

    Ludix one. Gurtner PY-12 carb

    Hi all, My Ludix one has been running fine and is to some extent... Apart from the carb keeps leaking from the float chamber overflow pipe. The...
    Thread by: Mark White, Sep 3, 2014, 22 replies, in forum: The Workshop
  8. Mark White
    Thread

    Ludix One idle issues

    Hi all, I have a bog standard Ludix One which has a few issues. I have posted a video of the erratic idle here:- [media] But sometimes it just...
    Thread by: Mark White, Jul 24, 2014, 0 replies, in forum: The Workshop