The UK's biggest automatic scooter forum.
Separate names with a comma.
What is that you would like to find in workshop manual?
Has anyone fitted Polini variator that comes with 8.1g rollers to the 110cc vision and what difference it made? I know it makes huge difference on...
HV coil is the same. Spark plug not sure you have to check the part no, my 110cc came with spark plug and I never took one out from my 50cc to...
Loom splits into two and you need the engine side only. There are two multi pin plugs and one single wire if I remember correctly that join to the...
Mine is NSC50R in repsol colours and they don't do that shape with 110cc engines so I would say as long as it is pre 2017 it should be fine.
Loom from the 50cc is slightly different from 110cc. It's missing connection for the air inlet temp sensor and engine temp sensor (also needed for...
Electrical connection on the 110 loom obviously fits that injector. It's the fuel line which didn't quite fit the injector. The quick connector...
You will need engine side wiring loom from 110 bike and obviously 110 ecu. You can use existing rectifier and HV coil. The connections to the...
Hi, I'd rather answer any questions here. How can I help?
It runs rich when you run 110cc ECU on 50cc engine. Some do that to gain extra 1000 RPM on their 50cc. ECU tries to compensate for missing IAT...
I know this is old thread but in case anyone was still interested in this swap it is possible. The engine mount is the same, rear wheel is the...