The UK's biggest automatic scooter forum.
Separate names with a comma.
have you tryed heavier rollers like 4.5g - 5.0g?,,, heavier roller will help to bring the rpm down
sounds to me that it may not be your rollers if from 10mph it go's ok, i belive its ur clutch springs you need harder springs
am not into destroying my bike, :grin: but i heard that adren pedstop ar doing a wheely and speed record on the north run this year...
sounds like ur jets ant right and you have,, nip't up, semmy sezed the engine, check your pisten rings/pisten, spark plug, and any splits in the...
o right,, i havent seen a rd sines i was 17,,, that was some time ago :grin:
i had a tzr 125 3cp2 (1990) with a power jet in,, power was all the way from 6.000 to 10.000 rpm my rd 125 lc2 (1988) did not have a power jet and...
if you take a stanley knife to the bungs on the rear of the light unit (50cc) and slice them of, you can insert the orig 100cc head light wires...
wiring info for the speedfight, trekker, vivacity General information All models have a 12-volt electrical system charged by a three-phase...
if the wheel rim fits ok,, just get a smaller tyre, like 130/70-12,,
yes the viva city and trekker shere the same frame,,, so the forks ar a strate swop and you can keep the handle bars, clock's etc
you can swop the selector/alternator plate from the ac engine to the lc engine,,, some selectors/alternator only have 3 wires and some have 4 wires
brill, thinks minor
hi there,, i was just wondering what thread size the main jet's ar that fit the malossi (dellorto) 25mm runner/typhoon carb,, am not sure if there...
when i get hold of a piaggio or gilera etc al give it a go :grin:
hay i dint wont to fend any one,,, just all the bikes iv tuned rs125, speedy 100, kx80 etc,, all needid an up jet when enlarging the bore size,,,...
ok,,, the 125 and 180 zorst ar the same,,, but iv phoned pm tunning up 5 min ago and they sed you cant put a 172 kit on a 125 with out up jetting...
no no no,,, you need to up jet and change rollers but on top of that,,, you just carnt bolt on a 172 kit on a standerd bike and start to ride...
arr,, i see what you meen now,,, :good: thanks agen
this is what i meen by 11'clock,, i dont wont the engine to sit like this as it look pants,, i wont the engine to be horizontal,, am starting to...
arr nice one, can you pm me some pic's of the subframe, am trying to pitcher it in my head,, do you meen weld the gilera runner subframe under the...